Guide
Recommendations
Basic concepts of EMI
Basic concepts of EMI
2017 - 07 - 28
Clicks: 0
Basic conceptsa. EMC, EMI and EMSElectromagnetic Compatibility (EMC) means the compatibility of products that are in the same electromagnetic environment (electric field and magnetic field). It has 2 ...
More
Fundamental knowledge of magnet
Fundamental knowledge of magnet
2017 - 07 - 28
Clicks: 0
Magnetic circuitThis article tries to introduce PMDC motor’s magnetic circuit by the most acquainted concepts. It also tries to introduce some characteristics and parameters of the motors by means of ...
More
Basic concept
Basic concept
2017 - 07 - 28
Clicks: 0
Basic conceptsMotor is an energy conversion device that converts electric energy into mechanical energy or mechanical energy into electric energy, using magnetic field as media.PMDC motor is an energy...
More
Usage and operation

Usage and operation


uThere is commutating spark during motor operation. Since there is no anti-explosion measure, flammable and explosive air is prohibited in the working site.


uBefore usage, please make sure the rated voltage, rated load, rotating direction, duty cycle and environment condition confirm to Product Specification. If there is any discrepancy, please contact EPsales engineer.  


uBefore operation, please make sure that the lead wire is securely connected. Also make sure the load moves smoothly without any restriction. Otherwise the motor will not run smoothly or, in the worst case, get burnt.


uYou can add protective devices to the motor according to its application, working site and installation requirement. The setting value should be validated by yourself. You can also contact EPsales engineer for confirmation. Make sure the motor will not run abnormally.


uIf there is odour, heat (generally T＞80℃) and smoke observed, stop the motor immediately. Find out the abnormal reason and fix it before you go on using the motor.

Above information is just for sharing of knowledge and introduce of products and manufacturers. non-commercial purpose. All content get from the network, the article is our perspective, if there is any violation of the copyright or you found objectionable information, please contact me, we will immediately delete it. The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. John Deere® Comer Gearbox ® Bush Hog Gearbox® Omni Gear® etc. are for reference purposes only and for indicating product use and compatibility and replacement of original broken parts. address:Gartenstadt,Nürnberg,Deutschland.Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM. Copyright © 2020 spacer coupling All rights reserved.