| Simple Data | Dimension(mm) | 29×25×27.1 | |
| Excess weight ( g ) | eighty | ||
| Speak to Arrangement | 2A/2B | ||
| Speak to Materials | AgSnO2 | ||
| Ambient Temperature | -forty five~+85ºC | ||
| Vibration | ten~50Hz,.075mm | ||
| Shock | 1000m/s²,(100g) | ||
| Specifications Knowledge | Nominal Voltage | nine~36VDC | |
| Energy Use | <2W | ||
| Running Voltage | 7.2V | ||
| Max. Motor Voltage | 24V | ||
| Max. Switching Current | 100 A | ||
| Surge Current | 6000A/10ms | ||
| Motor Resistance(R±20%) | 30Ω | ||
| Make contact with Score(Res) | 250VAC,100A | ||
| Make contact with Voltage | <60mV | ||
| Make contact with Resistance | <0.6mΩ | ||
| Dielectric Toughness | Motor to Speak to | >4000VAC 1min | |
| Throughout Open Speak to | >2000VAC 1min | ||
| CZPTal Lifestyle | >10000 | ||
| Mechanical Lifestyle | >100000 | ||
| Pulse Time | 40ms~60ms | ||
| Finding-up Time | <65ms | ||
| Release Time | <65ms | ||
| Off Get in touch with Length | ≥0.8mm | ||
| Insulation Resistance | >1000MΩ(500VDC) | ||
Cautions of Latching Relay:
1.Ideas of relay’s enter
(one)Polarity-Remember to examine the polarity within of our technological specification, if single coil then”+ -” or “- +”are fine,
you can alter it by one particular pulse.If double coil then it’s needed to affirm “-+-” or “+-+”ahead of leaving the our manufacturing unit.
(2)Driving-You should energize the relay at our suggest pulse width, rated voltage for dependable overall performance, if 1.5
instances or 2 times of worth or lower driving situation plz affirm with our engineer.
(three)Relays’contact position may be modified throughout transportation or installation thanks to impact of external force,
therefore remember to reset to the essential position.
2.Recommendations of relay’s output
(one)When picking the relay with hard relationship,remember to stay away from the exterior power on load terminals in the course of or right after
the installation.
(two)When the relay will be related with screw or bolts to the relays’ terminals, plz make positive your connection is
fastened and avoid relay from damages or other protection problems due to temp. Rise..
(three)The sampling sign wires of products are minimal, you should do not pull or torque for the duration of set up.
