Servo Motor Handle universal Bending Tests Device
1 Software
This testing machines is outfitted with computer, printer, and basic check computer software, to give an precise determination of steel the substance tensile strength, produce strength, the provisions of non-proportional extension energy, elongation, elastic modulus mechanical homes. Check final results can print (power – displacement, drive – deformation, pressure – displacement, tension – deformation, force – time distortion – time) 6 types of curves and connected examination information, with the software program self-examination operate that can self-diagnose issues. It is perfect tests equipment for the industrial and mining enterprises, scientific investigation models, universities, engineering good quality supervision station. They are excellent tests instrument project high quality tests area, universities and faculties, analysis establishment and industrial and mining.
two. Examination ability of equipment and appropriate CZPT:
ASTM E8 – 16CZPT Check Strategies for Pressure Testing of Metallic Materials
ISO 6892-one Components –tensile screening
three. Primary CZPT Parameters:
| Design | UTM-30 |
| Max. load force | 30KN |
| Crosshead Vacation | 1000mm |
| Successful tensile area | 700mm |
| Efficient Examination width | 450mm |
| Crossbeam vacation velocity | .001-500mm/min |
| Tests Specification | UTM-30 |
| Max.load | 30KN |
| Load precision | Class 1 (class .5 optional) |
| Load selection | 1%-a hundred%FS (.four%-a hundred%FS optional) |
| Load resolution | 1/300000 |
| Deformation Measurement Variety | .2%~a hundred%FS |
| Deformation accuracy | ≤±1% (≤±0.5% optional) |
| Deformation resolution | one/500000 |
| Load manage speed | .01~50 kN/s |
| Deformation control speed | .002~.5mm/s |
| Control Specification | UTM-thirty |
| Anxiety fee | .005%~five%FS/s |
| Anxiety price precision variety | When rate < 0.05% FS/s, the precision± 2% When charge ≥ .005%FS/s, the precision ±0.5% |
| Deformation rate | .005%~five%FS/s |
| Deformation price precision variety | When rate < 0.05% FS/s, the precision± 1% When rate ≥ .005%FS/s, the precision ±0.5% |
| Displacement management accuracy | ±0.5% |
| Continuous load, deformation and displacement handle | .five%~a hundred%FS |
| Continuous load, deformation and displacement management accuracy | Preset value≥10%FN, inside of the ±0.one% of preset worth Preset price<10%FN, within the ±1% of preset value |
| Clamping Requirements | UTM-thirty |
| Tensile grip | Manual Wedge Fixture |
| Spherical specimen clamping variety | Φ4-9mm,9-14, (fourteen-20mm optional) |
| Flat specimen clamping range | -7mm, 7-fourteen, (14-20mm optional) |
| Compression Plate | Φ100×100 mm |
| Bending fixture | 3 point bending fixture (optional) |
| Digital Extensometer for metallic content | YUU10/50 (optional) |
| Huge deformation extensometer for rubber | DBX-800 (optional) |
4. Primary Unit Function:
4.one Rigid ground-standing frame loading framework with upper area for tensile and reduced one particular for compression and bending take a look at
4.2 Exact ball screws face up to the whole loading with lengthy-existence use and compact structure.
4.3 Pace manage system is established under the table and contains the synchronous toothed belt and pulley for higher-efficient transmission, which are highlighted with lower noise and routine maintenance free of charge.
4.four Fixed crossbeam as higher types, and sits previously mentioned the frame and with center crossbeam as loading beam with clean journey when tests . The higher-accuracy sensor is installed underneath the crossbeam.
4.5 Load automated withstanding,, anxiety, strain control, cycle manage and self programming.
4.six Substantial precision load sensor for ensure exact and steady evaluate
4.seven Extensive crossbeam travel velocity from .05 ~ 500mm / min
4.8 Overload protection: as check power exceeds 2%-five% of the optimum take a look at drive of every single file, overload protection, it will cease.
5. Elements Offer list
| Item | Main physique | Substance |
| one | Higher beam | 1set |
| two | Cross beam | one established |
| three | Large precision screw ball | two sets |
| 5 | Servo motor | ZheJiang TECO Brand name (Japan Panasonic Brand name optional) |
| six | Load sensor | China Manufacturer (The united states Transcell Brand optional) |
| seven | .Reducers | ZheJiang Model |
| 8 | Synchronous belt | China Brand 1PC |
| 9 | Laptop | Lenovo, 1PC with Liquid crystal display monitor and all new |
| 10 | Printer | HPA4 shade ink-jet printer, 1PC |
| Merchandise | Clamping | QTY |
| 1 | Handbook Wedge Tensile fixture (hydraulic automated clamping fixtures optional) |
one set |
| 2 | Round Jaws Φ4-9mm,9-fourteen, (14-20mm optional) Flat Jaws: 0-7mm, 7-14, (fourteen-20mm optional) |
1 set |
| 3 | Compression Plate 100x100mm | one established |
| 4 | 3 position bending fixture (optional) | one set |
| five | Digital Extensometer for metal (optional) | one established |
| 6 | Massive deformation extensometer for rubber (optional) | 1 established |
6. Information Acquisition program
sixty one. The information acquisition method of device is composed of two higher precision A/D conversion channel and the highest resolution must be 1/300000 (minimum)
six.two. USB driven info -logger with USB two. and RS- 232 computer interface, five-keys joystick, 2MB RAM, Computerized recognition facility, Internal signal generator and 12-bit conversion resolution
seven. Computer software
7.one Batch and report processing program facility in doc and exl structure
7.2 The computer software is totally compliance with the corresponding worldwide requirements like ISO, ASTM and GB expectations
