T sequence synchronous motor is suited for driving blowers, pumps, steel rolling and other basic machinery
TK collection synchronous motor is suitable for specially for reciprocating compressors are utilized in refrigeration and fertilizer products
TM series synchronous motor is suitable for driving synchronous motors utilized in mining mills, largely driving ball mills, rod mills, coal mills, and many others.
T, TK, TM sequence motors are set up in indoors the place the altitude does not exceed one thousand meters, the cooling medium temperature does not exceed 40 degrees, the use environment is less dusty, and there are no corrosive gases this kind of as acids and alkalis. It is not allowed to function in environments made up of explosive gases .
The rated electrical power of the motor is 50HZ, the rated electricity element is .9 (major), the rated voltage is 6KV and 10KV. It can also give synchronous motors with different voltages and various frequencies in accordance to user specifications.
Motor shaft extension sorts incorporate solitary shaft extension, dual shaft extension, and no shaft extension modes.
The course of rotation of the motor is observed from the finish of the slip ring, usually counterclockwise, or clockwise according to needs.
The shaft extension of the motor can not bear the applied radial or axial drive.
The excitation gadget of the motor is usually a thyristor excitation device.
The motor allows full voltage to start immediately. If the user’s electricity grid does not let immediate beginning, a reduced voltage begin can also be utilised. At this time, the dynamic existing of the motor decreases in proportion to the terminal existing, and the commencing torque decreases in proportion to the sq. of the terminal voltage.
The ventilation manner of this collection of motors is open up organic air flow. It can also be manufactured into entirely enclosed duct air flow or collector ring good pressure ventilation.
Machine foundation: welded with steel plate, the reduced part of the device foundation is the outlet conclude of the motor.
Stator: The stator core is produced of .five mm thick reduced-decline silicon steel sheet punched with fan-formed sheets, and the main sections are separated by radial air duct pieces. Course F insulation.
Rotor: The magnetic pole is stamped out of metal plate, and it is installed on the magnetic pole of the rotor collectively with the magnetic pole coil, and the magnetic pole line is B-degree or F-level insulation.
Stator outgoing wire: There are six showing up heads, labeled U1, V1, W1, U2, V2, W2, which are led out on the higher outgoing clamp of the machine base with higher-voltage rubber cable.
Seat bearing: Use oil ring bearing or compound bearing. The seat bearing is installed on the base plate, and there is an insulating pad in between the bearing seat and the bottom plate to avert the shaft recent.