Thermal Silicone Coated Fiberglass Insulation Sheet for Motor LED MOS

thermal silicone coated fiberglass insulation sheet for Motor/LED/MOS

silicone coated fiberglass sheet is a kind of silicone elastomer composite material, it’s by 
insulating and good thermal conductivity filling material, silicone rubber and fiberglass compounded 
into. These products generally take the lower fastening pressure element fixed ways, the product has good thermal conductivity and high strength voltage resistance performance! 


                                             PROPERTY Table
Test Merchandise(device)                      Numerical Benefit Testing Technique
Modle No. BM120 BM150 BM180 BM900s BM-K4 BM-K6 BM-K10  
Thickness(mm) .23~.forty five .18~3. .eighteen .23 .sixteen .sixteen .sixteen ASTM D347
Shade grey pink grey pink gray inexperienced yellow Visual
Carry on Use Temp (ºC)                            -60~200 TGA+DMA
Thermal conductivity (W/m.k)    1. 1.3 2. 2.5 one.six one.6 one.six ASTM D5470
Thickness Tolerance (mm)              0.02±0.01        0.006±0.01 ASTM D347
Volume Resistivity (Ω-cm)                 10^10        10^12 ASTM D347
Dielectric Toughness (KV) three.five~4.5    4.five   4.   5.five    6    6    6 ASTM D149
Hardness (shore A) 75±5 85±5 85±5 92±5  90±5  90±5  90±5 ASTM D2240
Distinct Gravity two.three 2.five two.six 2.eight    3    3    3 ASTM D792
Tensile Toughness (kg/cm2) fifteen eighteen eighteen nine   34   34    34 ASTM D412
Elongation (%)      3    3    2   20   forty   40    40 ASTM D412
EP (12)                            Check out IEC-62321
Halogen(4)                            Check out EN 14582
Flating score                             94-v–1 ULNO:E34163

1.Strong tension resistance, 
two.Wear resistance, excellent insulation performance,
3.Non adhesive on surface , thin thickness, suitable for thermal insulation of power devices.

1.Thermal resistance : 0.49 -in2/W (@ 50psi)
2.Low fastening pressure
3.Surface smooth and highly adapted
four.electrical insulation

1.Large power source and automobile electronic heating module
two.Motor control, communication equipment
3.Power semiconductor, IS MOS tube IGBT chip
four.High voltage , high temperature , high power welding machine etc.
five.Navy, aviation
6.Heating power device

Sheet, die-slicing, roll, with adhesive and CZPT adhesive
Basic size:.23mm*300mm*50m , 0.23mm*300mm*76m
According to customer requirements can be processed into different sheet form also can adhesive

Our providers

On-line Services:24 several hours,Inquiry reply inside of speediest.
Effectively- Trained & Seasoned Personnel are to solution all your demands.
CZPT Export Carton Or Marked With CZPTer’s Information Or CZPTized.
Sample Order shipped within 24 several hours.

Q:Can we get the sample? If can , how to get it ?A:Yes , we can offer you the free sample if have in stock , but not include the shipping cost . Please feel free to contact to our sales if you need the sample. 
Q:How can you assure the good quality ?
A:With superior specialist machine and testing tools,we ensure 100 % good quality just before shipment.
Q: Can we OEM or according to our requirement to cut the size ?
A:We are a China Manufacture specialised in the thermal insulation components, for case in point,Silicone Rubber pad,Thermal tape,Thermal Grease,Silicone Fabric with more than eleven many years old.
Q:What payment phrase is CZPT?
A:Bank transfer , Paypal , Western Union , CZPT Card , VISA .

Any concern or want to know,make sure you contact to me !!!

Thermal Silicone Coated Fiberglass Insulation Sheet for Motor LED MOS