Y 180m-2 380V 220V Brushless Permanent Magnet DC Motor

Solution Description:
 
DC motor is a rotating motor that can transform DC electrical strength into mechanical power (DC motor) or mechanical power into DC electrical power (DC generator). It is a motor that can convert DC and mechanical power into a single one more. When it runs as a motor, it is a direct recent motor, which converts electrical power into mechanical strength when it operates as a generator, it is a direct existing generator, which converts mechanical vitality into electrical power.
 

Merchandise Title Y 180M-two 380V 220V Brushless Long lasting Magnet DC Motor
Motor Sort DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition structure The composition of DC motor ought to consist of two areas: stator and rotor. The static component of DC motor is referred to as stator. The main operate of stator is to produce magnetic field, which is composed of base, major magnetic pole, commutation pole, end cap, bearing and brush device. Managing portion is referred to as rotor, whose principal purpose is to create electromagnetic torque and inductive electromotive pressure. It is the hub of vitality conversion of DC motor. So it is also frequently named armature, which is made up of rotor, armature core, armature winding, commutator and fan.
Product Z Kind
Seat variety Z315-Z1000
electrical power sixty~2800kW
Voltage 220~1000V
Torque assortment one.five ~180kNm
Protection degree IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Working pace  Constant Speed /Reduced Velocity /Adjust Pace /High Speed Other 
Main classification DC Motor is a equipment that converts mechanical energy into DC electricity. It is primarily employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power supply of alternator. Even though in spots exactly where DC power is required, AC electrical power rectifier is also utilised to change AC into DC power, but from some aspects of performance, AC rectifier electrical power offer can not totally exchange DC generator.  
Application DC motors are broadly used in tape recorders, online video recorders, movie discs, electric shavers, hair dryers, digital watches, toys and so on.
Servicing approach Professional motor upkeep centre motor maintenance process: cleaning stator and rotor – changing carbon brush or other areas – vacuum F strain dipping paint – drying – Calibration equilibrium.
1. Use setting must be often dry, motor surface area need to be retained cleanse, air consumption ought to not be hindered by dust, fibers and other obstructions.
2. When the thermal protection of the motor carries on to run, it ought to be ascertained no matter whether the fault arrives from the motor or the overload or the location value of the protecting device is also minimal. Following getting rid of the fault, it can be put into operation.
three, ensure that the motor is nicely lubricated during operation. The basic motor runs for about 5000 hours, that is to say, lubricating grease need to be additional or replaced. When bearing overheating or lubricating deterioration is identified in procedure, the hydraulic force need to adjust lubricating grease in time. When replacing grease, the previous grease must be removed, and the oil groove of bearing and bearing cover need to be washed with gasoline. Then ZL-3 lithium grease should be loaded with 1/2 (2 poles) and 2/three (four poles, six poles and eight poles) of the cavity in between the interior and outer rings of the bearing.
4. When the daily life of the bearing is in excess of, the vibration and sound of the motor will improve clearly. When the radial clearance of the bearing reaches the pursuing value, the bearing need to be changed.
five, when removing the motor, it is Ok to eliminate the rotor from the shaft extension or the non extension end. If it is not essential to unload the supporter, it is a lot more hassle-free to take out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from getting damaged.
6. When changing the windings, the kind, measurement, turns and gauges of the first windings should be recorded. When these information are lost, they need to be attained from the producer and the authentic created windings must be changed at will, which frequently deteriorates a single or many performance of the motor or even makes it extremely hard to use them.

 

 

Y 180m-2 380V 220V Brushless Permanent Magnet DC Motor