DC motor is a rotating motor that can change DC electrical energy into mechanical energy (DC motor) or mechanical energy into DC electric vitality (DC generator). It is a motor that can change DC and mechanical vitality into one particular an additional. When it operates as a motor, it is a direct existing motor, which converts electrical vitality into mechanical strength when it operates as a generator, it is a direct recent generator, which converts mechanical vitality into electrical power.
|Merchandise Name||Z4 Series 80kw Medium DC Motor|
|Motor Type||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
|Composition framework||The construction of DC motor should consist of two components: stator and rotor. The static part of DC motor is called stator. The main function of stator is to produce magnetic field, which is composed of foundation, main magnetic pole, commutation pole, end cap, bearing and brush device. Working component is named rotor, whose main operate is to produce electromagnetic torque and inductive electromotive pressure. It is the hub of vitality conversion of DC motor. So it is also frequently called armature, which consists of rotor, armature core, armature winding, commutator and fan.|
|Torque range||one.5 ~180kNm|
|Security amount||IP23, IP44|
|Functioning speed||Constant Speed /Minimal Velocity /Modify Velocity /Substantial Speed Other|
|Main classification||DC Motor is a device that converts mechanical energy into DC energy. It is mainly employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electricity offer of alternator. Though in spots exactly where DC electricity is needed, AC energy rectifier is also utilised to convert AC into DC energy, but from some factors of performance, AC rectifier power provide can not totally substitute DC generator.|
|Software||DC motors are widely employed in tape recorders, movie recorders, online video discs, electrical shavers, hair dryers, electronic watches, toys and so on.|
|Routine maintenance strategy||Skilled motor servicing middle motor upkeep procedure: cleansing stator and rotor – changing carbon brush or other areas – vacuum F pressure dipping paint – drying – Calibration balance.
one. Use environment must be often dry, motor surface area need to be kept clean, air ingestion must not be hindered by dust, fibers and other obstacles.
two. When the thermal security of the motor proceeds to function, it ought to be ascertained whether or not the fault arrives from the motor or the overload or the environment benefit of the protecting unit is as well low. Soon after reducing the fault, it can be set into procedure.
three, guarantee that the motor is properly lubricated in the course of operation. The general motor runs for about 5000 several hours, that is to say, lubricating grease need to be extra or replaced. When bearing overheating or lubricating deterioration is found in operation, the hydraulic force need to modify lubricating grease in time. When replacing grease, the previous grease need to be taken out, and the oil groove of bearing and bearing include must be washed with gasoline. Then ZL-3 lithium grease ought to be stuffed with 1/2 (two poles) and 2/3 (4 poles, 6 poles and 8 poles) of the cavity in between the inner and outer rings of the bearing.
4. When the lifestyle of the bearing is above, the vibration and noise of the motor will improve obviously. When the radial clearance of the bearing reaches the subsequent value, the bearing need to be replaced.
5, when getting rid of the motor, it is Ok to get rid of the rotor from the shaft extension or the non extension end. If it is not necessary to unload the enthusiast, it is more handy to just take out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from becoming destroyed.
six. When changing the windings, the kind, dimension, turns and gauges of the unique windings must be recorded. When these data are missing, they should be attained from the manufacturer and the unique made windings need to be altered at will, which often deteriorates one or many functionality of the motor or even makes it unattainable to use them.